What is the networking configuration of AC+AP?

What is the networking configuration of AC+AP? I believe many inexperienced people are at a loss about it. Therefore, this paper summarizes the causes and solutions of the problem. Through this article, I hope you can solve this problem.

In the actual project, the most commonly used is the AC+AP networking mode. There is a prerequisite for using AC+AP networking mode. All networking devices must be the same firmware. Let's talk about the configuration method of AC+AP networking mode.

1. Configure AC soft router to surf the Internet.

2. Connect the LAN port of the AC soft router (or the port of the switch under the AC) with the WAN port of the subordinate device with a network cable, and then power on the subordinate device (first connect the network cable, then power on)

3. At this time, the subordinate device will automatically become AP, and all its configuration information will be synchronized from AC.

At this point, the networking of AC+AP is set up, and now you only need to view the status information of AP in the AP settings of the AC interface. The company's online customer service or telephone consultation.

After reading the above, have you mastered the method of networking configuration of AC+AP? If you want to learn more skills or want to know more about it, you are welcome to follow the industry information channel, thank you for reading!