2008 disk management

Task implementation

Upgrade these 3 disks to dynamic disks. (screenshot)

(1) right-click the added 3 disks to initialize the disk

(2) right-click the disk to convert to dynamic disk

two。 Create a simple volume on disk 1 with a size of 10m, formatted as NTFS and labeled E: (screenshot)

(1) create a simple volume and enter wizard mode

(2) set the simple volume size to 10MB

(3) assign the drive letter to E

(4) set the file system format

(5) setup completed

3. After completion, extend the E volume, which is provided by disk 1 and disk 2 with 10m each. What is the final size of the E volume? (screenshot)

(1) create an extended volume and enter the wizard

(2) Select disk space expansion volume

(3) complete the wizard

(4) Volume E is 30MB

4. Draw 15m on disk 2 and disk 3 to make a mirror volume, and set the volume label as F: (screenshot)

(1) create a new mirror volume and enter the wizard

(2) Select a disk to set the disk size for the mirrored volume

(3) assign driver number

(4) complete the wizard

5. Draw 20m on disk 2 and disk 3 to make a striped volume and set the volume label as G: (screenshot)

(1) create a new striped volume and enter the wizard

(2) Select the disk to allocate the size for the striped volume

(3) assign drive letter

(4) complete the wizard

6. Draw 12m each on disk 1, disk 2 and disk 3 to make RAID-5 volumes, and set the volume label to H: (screenshot)

(1) create a new RAID-5 volume and enter the wizard

(2) Select disk to allocate size for RAID-5 volume

(3) assign driver number and set volume label

(4) complete the wizard

7. Shut down the virtual machine, remove disk 3, and add a new disk. (screenshot)

(1) set and remove disk 3

(2) add a new disk

8. Start the virtual machine and repair Volume F (RAID-0 volume). (screenshot)

(1) format disk 3

(2) Delete the missing F volume image

(3) Select disk 2, add new volume F disk, and add image

(4) repair completed

9. Start the virtual machine and repair the H volume (RAID-5 volume). (screenshot)

(1) Select disk 1 or disk 2 H volume, and repair

(2) repair completed

10. Do the disk quota operation on the "E:" disk, set the disk quota of user user1 to 20MB, and then copy the content greater than 20MB to disk D to see if it is successful. (screenshot)

(1) "E:" disk attribute, select quota option

(2) add a new quota entry

(3) switch to the user1 user and copy the content larger than 20MB to disk D.

11. Clean up and defragment the disk "F:" (screenshot)

(1) through "all programs" → "attachment" → "system tool" → "disk cleanup". Select Delete

(2) through "all programs" → "attachment" → "system tool" → "disk defragmentation".