(Yuexiu Center Network Operation and maintenance) telnet remote Management
Remote Management Router
1. First, create a router link in Huawei topology graph.
2, configure IP address and subnet mask
(1) Configure the IP address of RA3260-AR1
system view
Go to System View
[Huawei]interface GigabitEthernet 0/0/0
Enter interface Gigabit Ethernet mode 0/0/0
[Huawei-GigabitEthernet0/0/0]ip address 192.168.1.1 255.255.255.0
enter the IP address and subnet mask
(2) Configure the IP address of RA3260-AR2
system view
Go to System View
[Huawei]interface GigabitEthernet 0/0/0
Enter interface Gigabit Ethernet mode 0/0/0
[Huawei-GigabitEthernet0/0/0]ip address 192.168.1.2 255.255.255.0
enter the IP address and subnet mask
3. Enter telnet remote management operation
(1) Operation of Route RA3260-AR1
system view
Go to System View
[Huawei]user-interface vty 0 4
User Interface vty 0 4
[Huawei-ui-vty0-4]authentication-mode password
Password for authentication mode
Please configure the login password (maximum length 16):xiaoling 123
Please configure your login password (maximum length 16): Xiao Ling 123
[Huawei-ui-vty0-4]protocol inbound telnet
inbound telnet mode
[Huawei-ui-vty0-4]user privilege level 15
User privilege level 15
[Huawei-ui-vty0-4]quit
Exit; Return to previous step
[Huawei]quit
Exit; Return to previous step
telnet 192.168.1.2
telnet IP address 192.168.1.2
Press CTRL_] to quit telnet mode
Log out of remote login mode
Trying 192.168.1.2 ...
Try 192.168.1.2 .
Connected to 192.168.1.2 ...
Connect to 192.168.1.1...
Login authentication
login authentication
Password:
system view
system view
[Huawei]sysname 2
Modify System Name 2
[2]
(2) Operation of Route RA3260-AR2
system view
Enter system mode
[Huawei]user-interface vty 0 4
User Interface vty 0 4
[Huawei-ui-vty0-4]authentication-mode password
Password for authentication mode
Please configure the login password (maximum length 16):xiaolin 123
Please configure your login password (maximum length 16): Xiao Ling 123
[Huawei-ui-vty0-4]protocol inbound telnet
inbound telnet mode
[Huawei-ui-vty0-4]user privilege level 15
Enter user privilege level 15
[Huawei-ui-vty0-4]quit
Exit; Return to previous step
[Huawei]Quit
Exit; Return to previous step
telnet 192.168.1.1
Remote login ip address 192.168.1.1
Press CTRL_] to quit telnet mode
Log out of remote login mode
Trying 192.168.1.1 ...
Try 192.168.1.1 .
Connected to 192.168.1.1 ...
Connect to 192.168.1.1...
Login authentication
login authentication
system view
Go to System View
[Huawei]sysname 1
Modify system name 1
[1]
4, and then remote operation
