What command on the computer is used to detect whether the network connection is normal?

This article mainly introduces what commands in the computer are used to detect whether the network connection is normal. It has certain reference value. Interested friends can refer to it. I hope you will have a lot of gains after reading this article. Let Xiaobian take you to understand it together.

The command used to check whether the network connection is normal is the "ping" command, which only needs to execute the "ping ip address" command in the command window. After the ping command is executed, if there is no abnormality in the network,"Lost =0" will be displayed (the shorter the time, the better, in milliseconds), and if the network is blocked,"Transmission Failure" will appear.

Operating environment: Windows 7, Dell G3 PC.

Windows +R opens the Run dialog box.

Type "cmd" and press Enter;

Enter "ipconfig" and press Enter;

You can see the IP address;

Enter ping +ip address (ping followed by a space);

"Lost =0" will be displayed when there is no abnormality in the network (the shorter the time, the better, in milliseconds);

If the network is blocked,"transmission failure" will occur.

Thank you for reading this article carefully. I hope that Xiaobian's article "What command in the computer is used to detect whether the network connection is normal" will be helpful to everyone. At the same time, I hope that everyone will support you more, pay attention to the industry information channel, and more relevant knowledge is waiting for you to learn!