Dhcp Relay Ethernet Link aggregation
SW2=
[sw2] dis cu
#
Sysname sw2
Vlan batch 10 20-add vlan
#
Interface Eth-Trunk1 link aggregation
Port link-type trunk sets the interface to trunk mode to allow vlan 10 20 to pass through
Port trunk allow-pass vlan 10 20
#
Interface Eth-Trunk2
Port link-type trunk
Port trunk allow-pass vlan 10 20
#
Interface Ethernet0/0/1
Port link-type access adds the interface to vlan 10 in access mode
Port default vlan 10
#
Interface Ethernet0/0/10
Eth-trunk 1 interface added to eth-trunk 1
#
Interface Ethernet0/0/11
Eth-trunk 1
#
Interface Ethernet0/0/12
Port link-type access adds the interface to vlan 20 in access mode
Port default vlan 20
#
Interface GigabitEthernet0/0/1
Eth-trunk 2 interface added to eth-trunk 2
#
Interface GigabitEthernet0/0/2
Eth-trunk 2
#
SW3=
Sysname Huawei
#
Vlan batch 10 20
#
#
Interface Eth-Trunk1 entry interface
Port link-type trunk sets the interface to trunk
Port trunk allow-pass vlan10 20 trunk allows access to vlan10 20
#
Interface Ethernet0/0/1
#
Interface Ethernet0/0/2
Port link-type access adds the interface to vlan 10 in access mode
Port default vlan 10
#
Interface Ethernet0/0/12
Eth-trunk 1
# add the interface to eth-trunk 1
Interface Ethernet0/0/13
Eth-trunk 1
#
SW1=
Sysname sw1
#
Vlan batch 10 20 30 100 add vlan
#
Cluster enable
Ntdp enable
Ndp enable
#
Drop illegal-mac alarm
#
Dhcp enable enables dhcp function
#
Diffserv domain default
#
Drop-profile default
#
Ip pool vlan20
Gateway-list 192.168.20.1
Network 192.168.20.0 mask 255.255.255.0 set up an address pool for vlan20
Dns-list 2.2.2.2
#
Interface Vlanif1
#
Interface Vlanif10
Ip address 192.168.10.1 255.255.255.0
Dhcp select interface sets dhcp to vlan10 based on port
Dhcp server dns-list 1.1.1.1
#
Interface Vlanif20
Ip address 192.168.20.1 255.255.255.0 set up a gateway for vlan20
Dhcp select global dhcp address Pool Select Global
#
Interface Vlanif30
Ip address 192.168.30.1 255.255.255.0 vlan30 setup Gateway
Dhcp select global
Dhcp select relay dhcp relay agent
Dhcp relay server-ip 23.0.0.3 points to the ip address of the agent
#
Interface Vlanif100
Ip address 11.0.0.1 255.255.255.0 vlan100 setup Gateway
#
Interface MEth0/0/1
#
Interface Eth-Trunk2 enters interface interface Eth-Trunk2 and sets it to trunk, allowing vlan 10 20 to pass through
Port link-type trunk
Port trunk allow-pass vlan 10 20
#
Interface Eth-Trunk3
Port link-type access enters interface interface Eth-Trunk3 and sets it to trunk, allowing vlan 100 to pass through
Port default vlan 100
#
Interface GigabitEthernet0/0/1
Eth-trunk 2 adds interfaces to eth-trunk 2
#
Interface GigabitEthernet0/0/2
Eth-trunk 2
#
Interface GigabitEthernet0/0/3
Port link-type access enters the interface and sets the interface to access port belonging to vlan30
Port default vlan 30
#
Interface GigabitEthernet0/0/4
Eth-trunk 3
# add interfaces to eth-trunk 23
Interface GigabitEthernet0/0/5
Eth-trunk 3
#
Rip 1 dynamic routing protocol
Undo summary turns off route summarization
Version 2 version 2
Network 192.168.10.0
Network 192.168.20.0 tell neighbors what they know about ip
Network 192.168.30.0
Network 11.0.0.0
AR1=
Interface Eth-Trunk3 enters Eth-Trunk3
Undo portswitch switches from two-tier mode to three-tier mode
Ip address 11.0.0.2 255.255.255.0 set ip for Eth-Trunk3
#
Interface GigabitEthernet0/0/0
Eth-trunk 3 adds interfaces to eth-trunk 3 (link aggregation)
#
Interface GigabitEthernet0/0/1
Eth-trunk 3
#
Interface GigabitEthernet0/0/2
Ip address 12.0.0.1 255.255.255.0 set ip
#
Interface NULL0
#
Rip 1
Undo summary
Version 2
Network 11.0.0.0
Network 12.0.0.0
AR2=
Interface Eth-Trunk4
Undo portswitch switches from two-tier mode to three-tier mode
Ip address 23.0.0.2 255.255.255.0 set ip
#
Interface GigabitEthernet0/0/0
Ip address 12.0.0.2 255.255.255.0 ip
#
Interface GigabitEthernet0/0/1
Eth-trunk 4 adds interfaces to eth-trunk 4 (link aggregation)
#
Interface GigabitEthernet0/0/2
Eth-trunk 4
#
Interface NULL0
#
Rip 1
Undo summary
Version 2
Network 23.0.0.0
Network 12.0.0.0
#
AR3=
#
Dhcp enable enables dhcp function
#
Undo dhcp server bootp
#
Ip pool vlan30
Gateway-list 192.168.30.1
Network 192.168.30.0 mask 255.255.255.0 set up the address pool
Dns-list 3.3.3.3 4.4.4.4
#
Interface Eth-Trunk4
Undo portswitch switches from two-tier mode to three-tier mode
Ip address 23.0.0.3 255.255.255.0
Dhcp select global global address pool for DHCP clients to use
#
Interface GigabitEthernet0/0/0
Eth-trunk 4 adds interfaces to eth-trunk 4 (link aggregation)
#
Interface GigabitEthernet0/0/1
#
Interface GigabitEthernet0/0/2
Eth-trunk 4 adds interfaces to eth-trunk 4 (link aggregation)
#
Interface NULL0
#
Rip 1
Undo summary
Version 2
Network 23.0.0.0
#
