Basic Operation of ROS soft routing

Basic operation of ROS

ROS can be managed from the command line, the WEB page, or the graphical management tool WinBox.

Command line operation

The kernel of ROS is the linux operating system, because many commands have a format similar to linux. However, ROS's File System is not public because only restricted commands can be used. ROS's command

Enter "/" to return to the root directory

Enter ".." Go back to the previous directory

Use the table key to complete the command

Use ""

The commonly used ones are interface, PPP, IP,

IP configuration example:

View the routing table: ip route print

Restore ROS to factory settings

/ system reset-configuration command to restore ROS to the newly installed state

Common commands for APIs:

View information about the interface: / interface print

Disable the network card

/ interface disable 0

Enable the network card

/ interface enable 0

Modify the name of the Nic:

/ interface set 0 name=wan

Shut down the system

/ system shutdown

Setup automatic installation

/ system identity set name= "ROS1" modifies ROS naming

Attachment: http://down.51cto.com/data/2366162