How to connect the network cable of the computer

This article will explain in detail how to connect the network cable of the computer. The editor thinks it is very practical, so I share it for you as a reference. I hope you can get something after reading this article.

1. First of all, prepare the network cable, wire pliers and crystal head, and cut off the rubber of the network cable to about the length of 2cm, exposing 8 different colors of thread.

two。 Then connect the 8 wires to the crystal head according to the color order shown in the picture. When accessing, be careful to push the plastic spring end of the crystal head down and press the network cable tightly against the top of the crystal head.

3. Then put the crystal head of the wire into the pressing slot of the wire clamp and hold the wire clamp vigorously to ensure that the metal can make good contact with the wire.

4. Then the crystal head of the network cable is connected.

This is the end of the article on "how to connect the network cable of the computer". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, please share it for more people to see.