What is the use of console interface
This article will explain in detail what is the use of the console interface for you. The editor thinks it is very practical, so I share it with you for reference. I hope you can get something after reading this article.
The console interface is a typical configuration interface; the Console interface of the router is directly connected to the serial port of the computer, and the router is configured locally by the terminal emulation program; the Console interface of the router is mostly "RJ-45" interface and marked with the word CONSOLE.
The Console interface is a typical configuration interface. Use the console cable to connect directly to the serial port of the computer, and configure the router locally using a terminal emulation program (usually using the "hyperterminal" that comes with Windows). Most of the Console interfaces of routers are RJ-45 interfaces and are marked with the words CONSOLE.
Action
The console interface of the switch: it is used to configure the switch, so only the network managed switch has it. Also note that not all network-managed switches are available, because there are many ways to configure the switch, such as Telnet command line, Web, TFTP and so on.
The Console port of the router: it connects directly to the serial port of the computer using a dedicated connection, and uses terminal emulation programs (such as HyperTerminal under Windows) to configure the router locally.
This is the end of the article on "what is the use of the console interface". I hope the above content can be helpful to you, so that you can learn more knowledge. if you think the article is good, please share it for more people to see.
