How to solve the problem that you can access the Internet when connected to the campus network, but there is no internet and you can't open hot spots?

This article introduces how to solve the problem that you can connect to the campus network but can not open hot spots without internet. The content is very detailed. Interested friends can use it for reference. I hope it will be helpful to you.

After the notebook is connected to the campus network, it is found that there is no internet, but it can surf the Internet, and the hotspot cannot be turned on at this time. It is useless to turn on and off flight mode and restart the network card.

The following solutions are convenient

1. Right-click into the settings, as shown in the following figure.

2. Click the Network sharing Center, then click Ethernet, and finally click Diagnostics. As shown in the following figure

3. It will detect that your network has been reset. At this time, you need to repair and restart the computer as an administrator, and then turn on the hotspot again. If you find that you cannot connect, you can close the hotspot and then turn on the hotspot. Or turn on the flight mode and then turn off the flight mode to achieve the purpose of refreshing. It was solved at this time.

On how to solve the problem of how to connect to the campus network can access the Internet but show that there is no internet and can not open hot spots to share here, I hope that the above content can be of some help to you, can learn more knowledge. If you think the article is good, you can share it for more people to see.