The solution of not responding to mouse clicks after the computer is turned on

This article mainly introduces the solution of the unresponsive click of the mouse after the computer is turned on, which has a certain reference value. Interested friends can refer to it. I hope you will gain a lot after reading this article. Let's take a look at it.

Causes and solutions: 1, the motherboard is not powered up, you can restart the computer; 2, the usb interface is loose, reseat and unplug; 3, there is a problem with the system driver, install the driver tool to detect whether the driver is abnormal, and then reinstall the driver to solve; 4, the mouse is broken, replace the mouse; 5, caused by computer poisoning, check and kill the virus.

After the computer was turned on, it was found that the computer mouse and keyboard could not be used, there was no response at all, and there was still no response after a long time, especially for desktop computers, which did not have a touch panel, which was really a very irritating thing. So what is the reason why the mouse click does not respond after the computer is turned on? How to solve it? Now I would like to introduce to you.

The reason and solution of the non-response of the boot mouse

1. Restart the computer to see if the mouse and keyboard are back to normal. If the fault is removed, it is caused by the lack of power on the motherboard.

2. First check whether the usb interface is loose, whether it works properly after plugging into the usb interface, and finally reseat it. If you are inserting the front usb interface, it may be that the mouse and keyboard do not respond due to the poor contact of the front usb interface. Because the front usb interface and the motherboard connection may be caused by the wrong connection. Let's take a closer look at the usb interface or try the rear usb interface to see if the fault has been resolved.

3. It may be the problem of the system driver. Netizens can try to install the driver wizard or magic rabbit tool to detect whether the driver is abnormal, or uninstall the driver and reinstall it to see if the mouse and keyboard return to normal.

4, usb serial port and your motherboard do not match, try to replace a mouse, keyboard in the usb interface to see, if the mouse is normal, either the original mouse is broken, or it is not a matching relationship, it is recommended to replace the mouse, keyboard drawing motherboard to test and repair.

5, finally, it may also be caused by computer poisoning, it is recommended to boot and hold down the F8 key to enter the safe mode and then use antivirus software to kill the computer, which may solve the problem.

Thank you for reading this article carefully. I hope the article "the solution of clicking the mouse without response after the computer is turned on" shared by the editor will be helpful to everyone. At the same time, I also hope that you will support and pay attention to the industry information channel. More related knowledge is waiting for you to learn!