How to restore the system of Hewlett-Packard Notebook computer

Today, I would like to share with you the relevant knowledge points of Hewlett-Packard notebook computer how to restore the system with one click. The content is detailed and the logic is clear. I believe most people still know too much about this knowledge, so share this article for your reference. I hope you can get something after reading this article. Let's take a look at it.

1. First, press the ESC or F11 key when the computer is turned on. Then, after pressing F11, there will be a short startup process, please wait patiently.

two。 Wait until the following interface appears after F11 boot, and then "troubleshoot" at the current interface point.

3. After selecting "troubleshooting", the following interface appears, and then select the "Recovery Manager" option in this interface. It should be noted here that some models do not have the "Recovery Manager" option in this interface, such as: ENVY13-d0**tx series, please find the Chinese "system recovery" option in the F11 interface.

4. Then go to the "Recovery Manager" interface and select "system recovery". Just mentioned, there is no "Recovery Manager" option to find "system recovery", and the interface is almost the same as the following figure.

5. The following screen appears after selecting "system recovery". Please operate carefully in the current interface and consider whether all the data has been backed up. If you choose not to back up the data after the backup, click next. On the contrary, if the data are all backed up, you should choose to back up the data. If you back up the data, you should provide a USB storage device for active backup. The file after backup is saved in the USB storage device with the file name of Recovery. Please be careful when backing up data. It is not recommended to use the automatic backup that appears here.

6. This must be connected to the external adapter, otherwise the following error will occur if system recovery cannot be carried out.

7. After looking at the following picture carefully, click next.

8. Then, when you get to the interface to restore the system, wait patiently.

9. The interface shown in the following figure appears, and click "continue" to wait for the computer to run independently and restart and other operations.

10. The following picture is the interface that appears after clicking "continue", indicating that the machine has begun to install the pre-installed system and software. Wait patiently.

11. Finally, when the recovery system is completed, some machines have the following shutdown and completion options, while some machines are restarted directly into the deployment system interface.

These are all the contents of the article "how to restore the system of Hewlett-Packard Notebook computer with one Button". Thank you for reading! I believe you will gain a lot after reading this article. The editor will update different knowledge for you every day. If you want to learn more knowledge, please pay attention to the industry information channel.