The seventh of the top ten tasks of firewall configuration, log management of firewall

Task 7 for configuring firewalls

Log Management of Firewall

1. Set the firewall time to Beijing time and the time zone name to Beijing.

2. Speed up the time by 1 hour.

Figure 7. 2

3. Specify that the NTP server address is 192.168.2.100, and the server is connected to the internal interface.

Figure 7.3

4. Enable log information at level 6 and send it to the cache.

Figure 7.4

5. Establish a logging policy to send all error messages and warning level messages related to IP (TCP/IP detection messages) to the console.

6. Operation: store the buffer contents in Flash, and the file name is test.

Figure 7.6

7. Configure to send logs to the syslog server with a sending level of 3, using the firewall name as the identity. The server is on the inside interface with the address 192.168.2.99; it is sent using the default port and protocol.

Figure 7.7