How to move workpiece to absolute coordinate system by ug

Editor to share with you ug how to move the workpiece to the absolute coordinate system, I believe most people do not know much about it, so share this article for your reference, I hope you can learn a lot after reading this article, let's go to know it!

Method: first find the specified workpiece, click the "Edit"-"moving object" option at the top of the page; then select the specified object, specify the angle, and the vector is the direction of the axis of rotation of the workpiece, and specify the axis point of rotation; then click the inverted triangle button on the right side of the "angle", select "measure", and measure the angle between the slant of the workpiece and the absolute coordinates; finally, click the "OK" button.

The operating environment of this tutorial: windows10 system, UG8.5 version, Dell G3 computer.

First of all, open ug in the computer and find the workpiece that needs to be corrected, as shown in the following figure.

Click Edit-move the object, select the object to rotate, select the motion selection angle, the vector is the direction of the axis of rotation of the workpiece, and specify the axis point of rotation.

Click on the inverted triangle behind the angle value, select the measurement, and measure the angle between the workpiece bevel and the absolute coordinates.

Click OK, and then preview if it is the desired location, click OK, if not continue to the next step.

Finally, the workpiece is positioned, and it is finished as shown in the following figure.

These are all the contents of the article "how to move the workpiece to the absolute coordinate system by ug". Thank you for reading! I believe we all have a certain understanding, hope to share the content to help you, if you want to learn more knowledge, welcome to follow the industry information channel!