What is the simulation mode setting of mdk5 single chip microcomputer stm32f103zet software?

Editor to share with you about the mdk5 single-chip microcomputer stm32f103zet software simulation mode setting is how, I hope you all have something to gain after reading this article, let's discuss it together!

Choose: Use Simulator, even if the software simulation.

Select: Run to main (), that is, skip the assembly code and jump directly to the main function to start the simulation.

Set the following:

Dialog DLL: DARMSTM.DLL and TARMSTM.DLL

All Parameter are:-pSTM32F103ZE

It is used to set the software and hardware simulation that supports STM32F103ZE (that is, you can observe the simulation results through the dialog box of selecting the corresponding peripherals through Peripherals). Finally, click OK to complete the setup.

Start the file script.\ debug.ini

Https://my.oschina.net/zengfr///MAP 0x40000000, 0x40001FFF Read Writemap 0xffff0000, 0xffffFFFF read write / / map 0x40000000, 0x4000FFFF read write / / APB1map 0x40010000, 0x40013FFF read write / / APB2map 0x40018000, 0x40030000 read write / / AHBmap 0x50000000, 0x5003FFFF read write / / AHBmap 0xE0000000, 0xE00FFFFF read write / / CORTEX-M3 internal peripheralsLOAD OBJ\ stm32.axf INCREMENTALFUNC void Setup (void) {xPSR = 1