How to draw an arc between two points of cad

This article is about how to draw an arc between two points of cad. The editor thinks it is very practical, so share it with you as a reference and follow the editor to have a look.

Cad two points to draw an arc between the method: first open CAD; and then in the lower command line enter the command "D"; then press and hold the left mouse button to move down, find the "arc" option; finally, find the "start point, endpoint, radius" option to set, and directly use the mouse to move to a distance equal to the length of the radius.

Methods:

You can do this by using the "start, end, radius" option in the "Arc" command in CAD. The specific steps are as follows (7 steps in total):

1. In the top drop-down menu, find "drawing", or enter the command "D" on the lower command line.

2. Hold down the left mouse button and move down to find the "arc" option, or enter the command "A" on the lower command line.

3. Hold down the left mouse button and move to the right to find the "start point, end point, radius" option, or enter the command "R" on the lower command line.

4. First click the starting point of the arc (the first point) on the interface with the mouse.

5. Click the endpoint of the arc (the second point) on the interface with the mouse.

6. Enter a value for the radius (half of the diameter) on the command line below, or directly use the mouse to move to a distance equal to the length of the radius.

7. Press the enter key to confirm that the arc of the specified diameter will be drawn between the two points.

Thank you for reading! This is the end of the article on "how to draw an arc between two points of cad". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, you can share it for more people to see!