H3C Fat AP configuration Manual-Open [No password]

Note: the following configuration is actually operated by me through AP, the connection is normal, there is no problem.

There is no DHCP server on AP.

Configuration ideas:

Configure basic configuration

Create a new service-template

Create a new interface WLAN-BSS

Call service-template and WLAN-BSS on WLAN-Radio

1. Basic configuration

New vlan 10, 30

[H3C-Fat-AP] vlan10 [H3C-Fat-AP-vlan10] quit [H3C-Fat-AP] vlan 19 [H3C-Fat-AP] vlan 30

Configure vlan30IP as: 10.10.19.20 (manage IP)

[H3C-Fat-AP-vlan30] int vlan30 [H3C-Fat-AP-Vlan-interface30] ip address 10.10.19.20 255.255.255.0 [H3C-Fat-AP-Vlan-interface30] quit

Set default rout

[H3C-Fat-AP] ip route-static 0.0.0.0 0.0.0.0 10.10.19.254

Set the interface G1 vlan 0 trunk 1-bit mode to allow all CPM to pass through.

[H3C-Fat-AP] int GigabitEthernet1/0/1 [H3C-Fat-AP-GigabitEthernet1/0/1] port link-type trunk [H3C-Fat-AP-GigabitEthernet1/0/1] port trunk permit vlan all Please wait... Done.

two。 Create a new service-template,ssid to set test, and enable service-template

[H3C-Fat-AP] wlan service-template 5 clear [H3C-Fat-AP-wlan-st-5] ssid test [H3C-Fat-AP-wlan-st-5] service-template enable Please wait... Done. [H3C-Fat-AP-wlan-st-5] quit

3. Create a new WLAN-BSS API and set vlan.

[H3C-Fat-AP] int WLAN-BSS5 [H3C-Fat-AP-WLAN-BSS5] port acc vlan 10 [H3C-Fat-AP-WLAN-BSS5] quit [H3C-Fat-AP] int WLAN-BSS6 [H3C-Fat-AP-WLAN-BSS6] port acc vlan 10 [H3C-Fat-AP-WLAN-BSS6] quit

4. Call service-template and WLAN-BSS on WLAN-Radio.

[H3C-Fat-AP] int WLAN-Radio1/0/1 [H3C-Fat-AP-WLAN-Radio1/0/1] service-template 5 interface WLAN-BSS 5

Test:

Connect to the test wireless network with your mobile phone, you can connect, and access to the network is normal.

View the connected client:

[H3C-Fat-AP-WLAN-Radio1/0/1] dis wlan client Total Number of Clients: 1 Client Information SSID: test -MAC Address User Name APID/RID IP Address VLAN----f862-14d5-4f88 -NA- 1 / 1 10.10.80.88 10murmuri-