How to solve the problem that the drop-down number of wps table cannot be increased by degrees?

In this issue, the editor will bring you about how to solve the problem that the drop-down number of the wps table can not be increased gradually. the article is rich in content and analyzes and narrates it from a professional point of view. I hope you can get something after reading this article.

Wps table drop-down number can not be incremented solution: first of all, the mouse over the lower right corner of the cell, when it becomes a cross, click and drop down; then click the lower right corner of the sequence containing the cross pattern, and select the second fill sequence in the menu.

Wps table drop-down number can not be incremented solution:

1, such as data, pull down from it to make incremental sequence. Place the mouse in the lower-right corner of the cell, click and pull down when it becomes a cross.

2. See that the default sequence format is the same number.

3. Click the pattern in the lower right corner of the sequence that contains the cross, and then select the second fill sequence in the menu.

4. The data of the sequence becomes incremented.

5. Another way is to fill in two or more data initially, as shown in the following figure, and select two data to drop down at the same time.

The above is the editor for you to share how to solve the wps table drop-down number can not increase the problem, if you happen to have similar doubts, you might as well refer to the above analysis to understand. If you want to know more about it, you are welcome to follow the industry information channel.