How to partition notebook SSD solid state disk
This article will explain in detail how to partition the notebook SSD solid state disk. The editor thinks it is very practical, so I share it for you as a reference. I hope you can get something after reading this article.
Partition has no effect on the life of solid state disk, hard disk partition is actually a kind of formatting, advanced hard disk formatting, when creating hard disk partition, various parameters are automatically set, hard disk master boot record table is created and the location of boot record backup is specified.
There is now a saying that SSD solid state drives should be partitioned with as few partitions as possible and keep a small blank partition for operations such as wear balancing and bad block mapping within solid state drives. In fact, consumers don't have to worry about small partitions. Manufacturers have already solved this when the solid state drive leaves the factory, and usually set a certain amount of reserved space, so if you draw a small partition yourself, then the hard disk space will really be insufficient.
If the solid state disk is not partitioned properly, for example, if all the partitions are relatively small, once the storage space is occupied more than 90%, there will be problems such as crash or slow reading and writing, so solid state drives with smaller partitions must be cleaned up in a timely manner. Now many lightweight books tend to have only 128g or 256g solid state drives, usually without partitions, if you need partitions, two is recommended, otherwise it will be too small, first, if there are too many partitions, there may be partition dislocation, the SSD performance of the disk area at the boundary of the partition will be affected, and second, it is not convenient to use.
Generally speaking, if the capacity of the solid state disk is large enough, at least 500g, then it is recommended to have 4 partitions to prevent problems in the system and to back up a lot of data when reinstalling. If the capacity of the solid state disk is small, it is best not to partition. At the same time, do not use the defragmentation feature that comes with the system on the solid state drive.
This is the end of this article on "how to partition notebook SSD solid state drives". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, please share it for more people to see.