How to check the network card driver under Linux

This article is to share with you about how to view the network card driver under Linux. The editor thinks it is very practical, so share it with you as a reference and follow the editor to have a look.

In fact, the driver of the network card is very simple, it is still related to the hardware, it is mainly responsible for sending and receiving data packets from the network, it sends the packets transmitted by the upper layer protocol to a specific media access control mode, and transmits the received data packets to the upper layer protocol.

Check the Nic model # lspci | grep "Eth"

Intel Corporation I350 is a dual-port gigabit network card of Intel.

X722 is an on-board Ethernet card module that provides 2 10GE ports and 2 GE ports

X710 is an extended network card with 2 10G ports

The network card driver modules of x722 and x710 are i40e.

The expansion card is 82599ES network card. Through inquiry, we know that 82599ES is X520 type. The driver is ixgbe

View the network card driver information ethtool-I eth3

Modinfo i40e

Thank you for reading! This is the end of the article on "how to check the network card driver under Linux". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, you can share it out for more people to see!