The solution of Network without internet access

Editor to share with you the solution of no internet access on the Internet. I hope you will get something after reading this article. Let's discuss it together.

The solution to no internet access in the network: 1, open the service list and find the DHCP client service; 2, set the startup type of the service to automatic, click apply; 3, open the network and sharing center, disable the current connection; 4, click to change the adapter settings and enable the network card.

The solution is as follows:

Right-click the start button and select run, as shown in the following figure

Enter services.msc enter while running, as shown in the following figure

Go to the service interface to find the DHCP client service, and double-click to enter, as shown in the following figure

Change the startup type to automatic, click start if not, and then click apply, as shown in the following figure

Right-click the open network and Internet settings in the lower right corner, as shown in the following figure

Then open the network and sharing center, as shown in the following figure

Click the current connection, as shown in the following figure

Enter the current connection and click disable, as shown in the following figure

After disabling, click the network symbol in the lower right corner to open the network settings, as shown in the following figure

Then click to change the adapter settings, as shown in the following figure

Right-click your network card, select enable, and then reconnect to the network will successfully connect.

After reading this article, I believe you have a certain understanding of "the solution to Network No internet access". If you want to know more about it, you are welcome to follow the industry information channel. Thank you for your reading!