VTY remote control

(1)

Router > enable

Router#config

Router (config) # interface f0and0

Router (config-if) # ip address 192.168.3.1 255.255.255.0

Router (config-if) # no shutdown

Router (config-if) # exit

Router (config) # enable password Cisco! Set plaintext password

Router (config) # enable secret Cisco! Set MD5 encryption password

Router (config) # line vty 0 4! Configure 04th VTY line, Cisco router can achieve up to 5

Log in to the system at the same time with telnet logical connection

Router (config-line) # login! Enable VTY login

Router (config-line) # password 123! Set the login password, otherwise you cannot log in

(2) after configuring VTY, you can log in to the router in DOS mode and enter telnet 192.168.1.1. The process is as follows:

Telnet 192.168.3.1

Trying 192.168.3.1...Open

User Access Verification

Password:

Router > enable

Password

Router#