How to solve the problem that the fan of xp video card does not turn

This article mainly introduces "xp graphics card fan does not turn how to solve" related knowledge, editor through the actual case to show you the operation process, the operation method is simple and fast, practical, I hope this "xp graphics card fan does not turn how to solve" article can help you solve the problem.

1. First, see if the fan cannot turn because of too much dust. If there is too much dust, clean up the dust on the fan with a brush. Dust is the biggest killer of graphics card fans. It is recommended to clean the computer once every 6 months to prevent computer failure caused by dust.

2. Turn the fan by hand to see if it is stuck by the fan bearing. If you feel very hard to turn the fan, it means that the bearing is stuck and can be repaired with lubricating oil.

3. If the fan does not turn after the above treatment, you can remove the original fan and try to change one. If it can be used normally after changing the fan, it is recommended to replace the fan after the internal damage of the original fan.

If it's not the dust, then it's the power supply! Plug the positive and negative poles of two batteries into its power Jack. Check to see if the fan shows signs of turning, and if so, it is not a power supply problem. On the power supply reinstalled to the chassis motherboard, you can test whether there is something wrong with the power supply of the chassis.

Note: some graphics cards with temperature control function require that the temperature of the card reaches a certain value before starting the fan for heat dissipation, this phenomenon does not need to be dealt with.

This is the end of the content about "how to solve the problem that the fan of xp graphics card does not turn". Thank you for your reading. If you want to know more about the industry, you can follow the industry information channel. The editor will update different knowledge points for you every day.