What is the usage description and configuration mode of the protocol standard in the RTSP protocol video platform EasyNVR

This article shows you the RTSP protocol video platform EasyNVR protocol standard instructions and configuration mode is what, concise and easy to understand, absolutely can make you shine, through the detailed introduction of this article I hope you can gain something.

The ONVIF standard will define a common protocol for information exchange between network video devices, including device discovery, real-time video, audio, metadata, and control information. The multiple possibilities offered by network video products make it easy for end users, integrators, consultants and manufacturers to benefit from cost-effective, more flexible solutions, market expansion opportunities and lower risk.

Why EasyNVR chose ONVIF:

ONVIF allows products from different manufacturers to communicate through a unified language, increasing synergy and flexibility;

ONVIF protocol is not specific to certain devices or certain projects, and its openness and compatibility reduce the integration cost of different solution devices and improve the flexibility of solutions.

At present, the "ONVIF standard" in the monitoring industry, IPC access to Haikang, Dahua NVR can be used normally, NVR access to Haikang, Dahua IPC can be used normally. Therefore, EasyNVR is bound to be able to access all onvif-enabled security devices on the market based on this.

Note: Onvif support varies from device to device.

Suppose there is ONVIF IPC for Brand A, ONVIF NVR for Brand B and ONVIF NVR for Brand C. When A's ONVIF IPC and B's ONVIF NVR can be docked, but not C's ONVIF NVR, it is not easy to conclude that C's ONVIF NVR is not good. This conclusion also applies to IPC.

EasyNVR uses the onvif standard library for detection and control. Users who use EasyNVR for control can use the onvif tool ONVIF Device Manager for verification and detection.

Note: The ONVIF Device Manager tool can be obtained by contacting us.

EasyNVR uses ONVIF instructions:

1. Edit the corresponding channel:

2. Check the protocol onvif, click the detect onvip button, and detect the internal and external devices supporting onvif.

3. Select the IP of the device to be detected, fill in the user name and password of the corresponding device, and click the detect button to successfully detect the device.

The above content is RTSP protocol video platform EasyNVR protocol standard use instructions and configuration mode is what, you learned knowledge or skills? If you want to learn more skills or enrich your knowledge reserves, please pay attention to the industry information channel.