The solution to the loss of some drawings after opening cad

This article is to share with you the content of the solution to the loss of some graphics after cad is opened. Xiaobian thinks it is quite practical, so share it with everyone for reference. Let's follow Xiaobian and have a look.

The solution to lose some graphics after cad is opened: first load the drawings you want, click open the tool option above; then select the option in the drop-down menu, switch to "open and save" and click auto-save; then switch back to "file" and click "auto-save location"; finally find the auto-saved file and change the suffix name to DWG.

CAD open after part of the graphics lost solution:

1. Open CAD and load the drawings we want to load;

2. Find the tool option above and click Open. Select the option in the drop-down menu.

3. Switch to "Open and Save" and click Auto Save;

4. Switch back to "File" and find "Auto Save Location" below and click Open;

5. Then find the automatically saved file and change the suffix name to DWG. This way the pattern is fixed.

Thank you for reading! About "cad open part of the graphics lost solution" this article is shared here, I hope the above content can have some help to everyone, so that we can learn more knowledge, if you think the article is good, you can share it to let more people see it!