Construction of domain environment for small and medium-sized networks-- second quarter (network configuration)

"the first season."

The switch is the most basic equipment unit in the network system. The small and medium-sized domain network architecture I plan for users is gigabit access-> 10 gigabit core (two-tier architecture), using optical fiber connection between the access and the core.

The diagram of the lab topology is as follows:

In the experimental environment, I use the S5700 switch in Huawei's eNSP tool to simulate the core switch and the VMnet in the virtual network editor on VMware Workstation to simulate the access switch. As shown below:

First, connect the interface between a S5700 and three Cloud as shown in the figure, and then configure the VMnet4 according to the network plan in the first season, so that they can communicate with each other. (the rest of the Cloud are in the same way)

Finally, the specific configuration on the S5700 core switch is as follows:

1. Configure the user name of the switch

"sysname core"

2. Configure the switch to connect users

"user-interface con 0

User-interface vty 0 4

User privilege level 3

Set authentication password cipher Q + R1Cfk`f