H3C Port Mirror-grab packet

In the past, the commands for different models of H3C devices were also different. After a brief check, we found that all the devices above S3100 (including S36, S55, S75, etc.) are configured to capture packages as follows (that is, configure a local group first, and then configure monitor port and mirror port respectively):

# create a local mirror group.

System-view

[Sysname] mirroring-group 1 local

# configure the source port and destination port for the local mirror group.

[Sysname] mirroring-group 1 mirroring-port Ethernet 1-0-1 Ethernet 1-0-2 both

[Sysname] mirroring-group 1 monitor-port Ethernet 1-0-3

# displays the configuration information of the local mirror group 1.

[Sysname] display mirroring-group 1

Mirroring-group 1:

Type: local

Status: active

Mirroring port:

Ethernet1/0/1 both

Ethernet1/0/2 both

Monitor port: Ethernet1/0/3

After the configuration is completed, users can monitor all messages on Ethernet on 1-0-3.

Attachment: http://down.51cto.com/data/2367747