The method of filling oblique fringes with cad

Editor to share with you the method of filling diagonal stripes in cad, I believe most people do not know much about it, so share this article for your reference, I hope you can learn a lot after reading this article, let's go to know it!

Cad fill oblique stripes method: first click on the [rectangle] to draw quadrilateral; then click on the [Hatch] icon, select [ANSI31] in the pop-up window, click OK; then the angle input 30 ratio input 50, and click [add: select object] to select quadrilateral; finally, click [Preview] and click [OK].

The method of filling diagonal stripes with cad:

1. Left-click on the CAD icon to open CAD

2. Click the CAD "rectangle" icon and follow the prompts to draw quadrilaterals. As shown in the picture

3. Click the "Hatch" icon, as shown in the figure

4. Select "ANSI31" in the pop-up window and click OK. As shown in the picture

5. Enter "30" for angle and "50" for scale, as shown in the figure.

6. Click "add: select object" and select quadrilateral. As shown in the picture

7. Click "Preview". If you can, press "ESC" to return, and click "OK". The effect is as shown in the picture.

The above is all the content of this article "how to fill diagonal stripes in cad". Thank you for reading! I believe we all have a certain understanding, hope to share the content to help you, if you want to learn more knowledge, welcome to follow the industry information channel!