Login encrypted with SSH and Telnet password

Lab requirements: R1 remotely logs in to R2 with SSH

two。 Enter the fame0 interface of R1 and R2 respectively, and assign the ip address.

The ip address of R1 is 192.168.1.1 Universe 24.

The ip address of R2 is 192.168.1.2

/ 24

(1) establish the account number and password of the router

(2) configure a domain name for the router

(3) generate a key of rsa algorithm, and the key is 1024

Next, do a privileged mode secret

The above ssh password encrypted login, the writing is not good, please give us a lot of suggestions, thank you

Remote login using Telnet

Experimental requirements:

R2Telnet remotely logs in to R1

The experimental topology is as follows

Configure the interfaces of R1 and R2 with ip addresses

After connecting on R2, show run to view the configuration made by R1

Welcome to join us for discussion.