How to set static public network ip

This article mainly explains "how to set static public network ip". The content of the article is simple and clear, and it is easy to learn and understand. Please follow the editor's train of thought to study and learn "how to set static public network ip".

It depends on whether your network is dynamic IP or static IP. If it is a dynamic IP (usually dialing using PPOE), it cannot be changed. If it is a static IP, it can be set directly according to the IP address provided by the operator.

Setting method:

1. Home router, configure the IP address\ subnet mask\ gateway\ DNS given to you by the operator directly on the WAN port (some also called Internet port), and then surf the Internet.

2. Enterprise routers (or firewalls) require commands or WEB.

(in general, different brands are configured differently, such as Cisco\ Huawei\ Hua3, etc. And use command mode configuration, some models of devices also support WEB or configuration tool configuration)

The computer can manually configure the Tcp/ip property directly in the local connection, similar to the first category.

Thank you for your reading, the above is the content of "how to set static public network ip". After the study of this article, I believe you have a deeper understanding of how to set up static public network ip, and the specific use needs to be verified in practice. Here is, the editor will push for you more related knowledge points of the article, welcome to follow!