How to limit the wifi speed of others in windows

This article mainly describes how to limit the wifi speed of others in windows, the article is very detailed, has a certain reference value, interested friends must read it!

1. Start login router settings URL, enter account password to login.

2. At this time, you need to click on the ARP mapping table in the interface to view the IP address segment of the router and record it in time.

3. Click Control Rules to enter, if there is no need to set, click Add New Entry to operate.

4. This step is important to ensure that your ip can circumvent this rule. If you set the address segment to 192.168.1.2 - 192.168.1.253 and your IP to 192.168.1.254, you can basically control the speed of others, and the port segment is 20-65535.

5. After setting, according to the size of the network cable to control the speed, and finally save.

6. Start setting your IP to avoid this rule. First check your IP and DNS. Open the following interface and enter the command ipconfig/all to check the DNS address.

7. Open Local Connection Properties, select Internet Protocol and click Properties to enter.

8. Finally, set the fixed ip address to avoid the rules set, gateway is the router address, DNS is just the address found in step 6, enter save.

The above is "how to limit other people's wifi speed in windows" all the content of this article, thank you for reading! Hope to share the content to help everyone, more relevant knowledge, welcome to pay attention to the industry information channel!