Open the hardware array cards supported by the cache system

Open the list of hardware array cards supported by the cache system (not limited to the following models)

At present, the perfect support can be confirmed as follows:

HP/ Hewlett-Packard Smart Array series array cards (such as P400/P410/P800, etc.)

Dell/ Dell PowerEdge PERC4/PERC5 RAID Array Card

Promise PDC20XXX/40XXX series array cards

LSI Logic / Symbios Logic MegaRAID SAS 2208 [Thunderbolt] array card

LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS array card

LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 array card

Dell T110 server array card

IBM x3650 M4 server comes with array cards

IBM system X series servers come with array cards

Press the Ctrol+H key when the system BIOS starts to enter the disk array configuration. After the configuration is complete, the system can automatically recognize the hard disk.

In the case of LSI array cards, there is no need to manually configure the array, and the installer automatically creates the array.

Note: because the system disk contains a bootstrap program and supports a maximum of 2T, there is no need to create an array greater than 2T.

The following are 12 1T hard drives, including three arrays, one 1T array with one hard disk (system disk occupies 1G), one 6T array with six hard drives, and one 5T array with five hard drives.