Configuration of OSPF

Today, our group conducted an experiment on the basic configuration of OSPF. The members of our group are Wang Jiadong, Zhang Hui and Liu Saiyu.

OSPF (Open shortest path first) protocol is one of the most widely used routing protocols in the network. It belongs to the internal gateway routing protocol, which can adapt to the network environment of various sizes, and is a typical link-state negotiation. By spreading the link state information of the equipment to the whole network, the OSPF routing protocol makes every device in the network finally synchronize to a database with the link state of the whole network. Then the router adopts SPF algorithm, takes itself as the root, and the computer reaches the shortest path to other networks, and finally forms the routing information of the whole network. OSPF is a classless routing protocol that supports VLSM (variable length subnet mask). OSPF advertises the link status in the form of multicast. Today, my main task is to configure 30% of the switch and complete the protocol configuration of ospf. The following is my experimental process:

The first step is to enter the editing mode of the layer 3 switch. Control vlan 10 and vlan 50 ports

Step 2, configure IP

Step 3: set the ospf protocol on the device

Our experiment is done, but there are still many things we don't understand in the process. I look forward to doing better in the next experiment.