How to use pc3000 to change the module location of Xishi hard disk

This short article will show you the function of "Move\ Resize module" in catalog editing.

When we open this menu, we will see the window below.

Read params-read information from the directory

Write params- writes changes to the directory

Editing-Edit entry

Let's look at how to edit an entry.

For example, we need to move module 11 to another fastener area address.

1, select 11 good modules, and then select Edit.

2 Let's change the copy0 or copy1 address of module 11, or change their address at the same time.

We will see a new menu button.

The new menu will automatically find free space without our intervention.

The size of the free space found depends on the size of the module, which is generally larger than the module.

Find free space on copy0

We see two writable address ranges, the new address range 15 842-53 545 and the current address range 82 272-109 695

We choose the new address range 15842 and 53545

Write changes to the module copy0 to the directory

Press write params and then click ok in the next window

When the write is complete, we will see the following log

Restart the hard drive (power off, power on) check the module's new address in the module table

We see that the new address of module 11 has been changed to 16000.

The function of changing the address of the module has a friendly interface, easy to operate and semi-automatic.