Ciso Packet tracer Experimental Network Router configuration

A simple local area network and wide area network experimental platform is built as follows:

The router configuration commands are as follows:

Router > enable

Router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router (config) # hostname RB

RB (config) # enable password todd

RB (config) # interface serial 3bin0

RB (config-if) # no shutdown

RB (config-if) # ip address 192.168.1.2 255.255.255.0

Ctrl z

RB#ping 192.168.1.1

RB#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

RB (config) # interface f (tab)

RB (config) # interface fastEthernet 0Universe 0

RB (config-if) # ip address 192.168.2.1 255.255.255.0

RB (config-if) # no shutdown

Note:

The router address is the gateway, which is usually set to the first address or the last address. For example, 192.168.0.1 or 192.168.0.254

Learning computer network needs to be standardized and careful to avoid mistakes.