Example Analysis of iOS11 Simulator in iOS11 Development
This article will explain in detail the example analysis of iOS11 simulator in iOS11 development. The editor thinks it is very practical, so I share it with you for reference. I hope you can get something after reading this article.
Introduction of iOS11 Simulator
The mobile phone-like model seen in figure 1.6 or 1.7 is the iOS simulator. IOS simulator is a device that detects programs when there is no iPhone or iPad device. IOS simulator can mimic some of the functions of real devices such as iPhone or iPad. This section will explain some of the operations of the simulator.
1. The difference between simulator and real machine
The iOS simulator can mimic the functions of real devices such as iPhone or iPad, as shown below.
Rotate screen: rotate up, rotate down, right to left
Gesture support: tap, touch and press, tap twice, slap, flick, support, pinch
These functions can only be realized by iOS simulator, but other functions can not be realized, such as making phone calls, sending SMS messages, obtaining location data, taking photos, microphones and so on.
two。 Exit the program
What if you want to exit the application shown in figure 1.7 (a program designed to perform a particular function for the user is called an application)? At this point, you need to select the Hardware | Home command in the menu bar to exit the application, as shown in figure 1.9.
Figure 1.9 main interface
Note: in figure 1.9, you can see that the icon similar to the mesh white image is the HelloWorld application you just ran. In Xcode, any running program will be displayed in the main interface of the iOS simulator. When you tap the icon of the corresponding application, you will enter the corresponding application.
This is the end of this article on "sample Analysis of iOS11 Simulator in iOS11 Development". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, please share it for more people to see.
