Virtual machine bridging mode is based on win10

There is no vmnet0 network card (based on win10) after installing the virtual machine. The solution is:

Https://jingyan.baidu.com/article/af9f5a2d11af4243140a4585.html

Start device install service for win

Then reset the default settings for vmware:

Set the settings of the virtual machine to bridge:

After configuring the vmware software, configure the linux network:

Of course, what I still keep above is the configuration of nat mode, but after restarting the network service, it completely solves the problem of surfing the Internet and ping host win10 (of course, you can also set the static mode and add ip,gatway,dns).

Example of bridging mode:

Confirm that the network segment is on the same segment as the native win10, and then configure ip:

In this way, you can only ping the gateway and ip of the same network segment, and you cannot access the Internet. You need to configure as follows:

At this point, the Internet will be solved!