SLTechnology News&Howtos › Network Security ›

USG Firewall telnet Lab

Shulou Source: shulou.com Published: 2022-06-01 06:22:28 10月04日 Update

Experiment with USG5500 Firewall

System-view

[SRG] interface g0/0/0

[SRG-GigabitEthernet0/0/0] ip address 192.168.1.1 24 interface configuration address

[SRG-GigabitEthernet0/0/0] display this (show current configuration)

[SRG-GigabitEthernet0/0/0] service-manage enable enables the service

[SRG-GigabitEthernet0/0/0] service-manage telnet permit allows telnet network management firewall

[SRG-GigabitEthernet0/0/0] quit exits

[SRG] user-interface vty 0 4 sets virtual terminal

[SRG-ui-vty0-4] authentication-mode aaa authentication method AAA

[SRG-ui-vty0-4] protocol inbound telnet defines telent traffic

[SRG-ui-vty0-4] quit

[SRG] aaa

[SRG-aaa] local-user 111 password cipher 666

[SRG-aaa] local-user 111 service-type telnet

[SRG-aaa] local-user 111 level 3

[SRG-aaa] q

Router configuration

System-view

[Huawei] sysname R2

[R2] interface e0/0/0

[R2-Ethernet0/0/0] ip address 192.168.1.2 24

[R2-Ethernet0/0/0]

[R2-Ethernet0/0/0] q

Verification

[R2] q

[R2] quit

Tel

Telnet 192.168.1.1