How to use SLAMTEC Mapper Development Kit quickly
In this issue, the editor will bring you about how to quickly use the SLAMTEC Mapper development kit. The article is rich in content and analyzed and described from a professional point of view. I hope you can get something after reading this article.
Step 1: connect quickly
SLAMTEC MAPPER development kit is composed of MAPPER and its supporting power cord. As shown in the following picture.
Please remove and place the SLAMTEC MAPPER in the kit on a flat countertop, connect the power cord to the SLAMTEC MAPPER power connector (J1 interface), and use 5V power supply. The figure below is as follows
Step 2: start and connect to the computer
After confirming that the SLAMTEC MAPPER is positioned horizontally, dial the switch (SW1) to the ON startup device, the indicator light (D1) is yellowish green, about 20 seconds later the radar starts to rotate, and the device starts normally.
When the device starts normally, turn on your wireless network adapter and you will see the hotspot SLAMWARE-XXXXXX.
SLAMTEC MAPPER Development Kit Quick use Guide Copyright (c) 2009-2013 RoboPeak Team Copyright (c) 2013-2019 Shanghai Slamtec Co., Ltd.
Please use the wireless network card to connect to "SLWAMWARE-XXXXXX" (you can also use the wired network to connect SLAMTEC MAPPER to PC, when the PC network adapter needs to be set to DHCP mode)
Step 3: download and use RoboStudio
Please go to the official website of Silan Technology to download the latest RoboStudio: http://www.slamtec.com/cn/RoboStudio. When the device starts normally, use RoboStudio to connect to the system. The default IP is 192.168.11.1. After the connection is successful, the map scanned by MAPPER will appear in the RoboStudio interface.
The above is how the SLAMTEC Mapper development kit shared by the editor has been used quickly. If you happen to have similar doubts, you might as well refer to the above analysis to understand. If you want to know more about it, you are welcome to follow the industry information channel.
