What is the simple method of Auto Rename

In this issue, Xiaobian will bring you about what is the simple method of Auto Rename. The article is rich in content and analyzed and described from a professional perspective. After reading this article, I hope you can gain something.

Cadence design generally does not advocate changing Logic (ECO change of PADS) in PCB files, but Auto Rename is still a very practical function, re-ranking according to the layout, which can make the PCB screen logo clearer, easier to check, easy to find, easy to repair, etc. Here's a quick record of the simple Auto Rename method.

1, Open PCB Editor"Rename" dialog box, operate as follows

3, At this time we need to export the latest PCB netlist, as follows (note the path!)

4, Now back to schematic

We need to inject the netlist back into the schematic as follows

5, set the path, this can not be wrong! The operation is as follows (note that the two *.SWP file paths should be the same)

6, Click "OK" to start the reply, pay attention to the log file and schematic diagram, is it found to be the same as PCB!

The above is what the simple method of Auto Rename shared by Xiaobian is. If you happen to have similar doubts, you may wish to refer to the above analysis for understanding. If you want to know more about it, please pay attention to the industry information channel.