The solution of not displaying the Lineweight of cad Printing

This article will explain in detail the solution of not displaying the linewidth of cad printing. The editor thinks it is very practical, so I share it with you as a reference. I hope you can get something after reading this article.

Cad print lineweight does not show the solution: first of all, in the upper left corner of the cad interface toolbar click [File], and select "print Preview" in the subordinate menu; then click the option of the small arrow in the lower right corner; then check the [print object lineweight] on the front; finally click [OK] in the lower right corner.

Solution:

The solution for not displaying the lineweight set when cad prints:

1. After drawing the cad graph, you can see that the drawing is wideband.

2. Click "File" in the toolbar in the upper left corner of the cad interface and select "print Preview" in the subordinate menu.

3. In the print preview, you can see that the previewed drawing does not show the lineweight.

4. Click [File] in the upper left corner again, and then click the option of "print".

5. After entering the [print] settings page, click the option of the small arrow in the lower right corner.

6. Check the front of the Lineweight of the printed object in the print options on the right.

7. Then click "OK" in the lower right corner.

8. Click [File] in the upper right corner again, and then open "print Preview".

9. You can see that the linewidth appears in the graphics in the print preview, so that it will be wireline when printing. The problem that the lineweight set when cad printing does not display is solved.

On the "cad print lineweight does not show the solution" this article is shared here, I hope the above content can be of some help to you, so that you can learn more knowledge, if you think the article is good, please share it out for more people to see.