Implementation of router router routing configuration on a single arm in Packet Tracer

Experimental objectives:

Master the configuration method of router on a stick

Realize the communication between different VLAN through the router with one arm

Technical principle:

Single-arm routing is a layer 3 network device router to realize the communication between VLAN. It only needs an Ethernet, can undertake all VLAN gateways by creating subinterfaces, and forward data between different VLAN.

The steps of the experiment:

Create the topology diagram shown in the figure

Set up Switch

En

Conf t

Vlan 2

Exit

Vlan 3

Exit

Interface fastEthernet 0/2

Switchport access vlan 2

Exit

Int fa 0/3

Switchport access vlan 3

Exit

Int fa 0/1

Switchport mode trunk

Configure Router

En

Conf t

Int fa 0/0

No shutdown

Exit

Interface fast 0/0.1

Encapsulation dot1Q 2

Ip address 192.168.1.1 255.255.255.0

Exit

Int fa 0/0.2

Encapsulation dot1q 3

Ip address 192.168.2.1 255.255.255.0

End

Show ip route