Juniper SRX vmware simulator (available network cards can appear)

one。 Download address:

Http://bbs.hh010.com/forum.php?mod=viewthread&tid=376924

two。 Learn the video:

Http://blog.sina.com.cn/s/blog_52ddfea30101ff8x.html

three。 Configuration process:

a. Install virtual box, import the owa file, and generate the vmdk file in the virtual machine directory

-it is said that you can decompress the vmdk file in the owa file by changing the extension of the vmdk file to zip. My test was unsuccessful. If you open it with vmware, you will get an error.

-under normal circumstances, it should be possible to import owa files with virtual box. It may be a problem with my CPU. Opening it will report an AMD-V error.

B.VMWare create a new virtual machine. Select Custom. Refer to the link below. Note that when mounting the VMDK image, select Buslogic for the hard disk SCSI controler, set the memory to 1G, and add two network cards.

-disk configuration reference link: http://eisen.me/archives/2185.html

-remember: when mounting the disk, you need to choose conversion, otherwise the hard disk may not be mounted after boot.

-remember: number of process needs to be changed to 2, otherwise there will be no network card even if it is started.

-refer to the description of the following link: According to my test, it is required to configuretwo CPUs for VM otherwise all Gigabit Ethernet interfaces are not recognized.

c. The virtual machine configures Serial port, leverages named pipe tcp proxy, and connects with CRT:

-during the test, it is found that the problems that may be displayed. After SRX starts, the command line will run to the place where the characters are already displayed.