Ruijie 530mure Wireless AP configuration
0 console login to AP to switch to fat ap ap-mod fat
1 vlan100-- > create vlan100 (it is locally valid when the physical interface int g 0max 1 encapsulates dot1Q vlan100, and when the physical interface int g 0max 1 has a subinterface, it is globally valid when it encapsulates different VLAN, that is, the relevant VLAN is required for the uplink switch)
2 int g 0/1
Enc d 100-- > Encapsulation vlan100
3 dot11 wlan 1-> Wireless Interface wlan (1-16)
Vlan 100-- > Associated vlan 100
Bro ssid-- > broadcast
Ssid test-- > SSID name test
4 int d 1amp 0.100-> enter the RF card sub-interface (if you do not use the sub-interface encapsulation, use the int d 1amp 0 RF interface, the transmitted signal, win8, win8.1 can not connect to its wireless network, win7 can)
Enc d 100-- > Encapsulation vlan100
Mac fat-- > fat
Int d 1ax 0-> enter the frequency card interface
Wlan 1-> Associated Wireless Interfac
Power lo 100-- > Power is 100%, default is 20%
Chann 1-- > Wireless channel is 1
Mac fat-- > fat
5 ip dhcp po test-- > if there is no DHCP server in the connection, you need to enable the local DHCP, whose name is test
Netw x.x.x.x-- > address pool
Dns x.x.x.x-- > DNS address
Default-r x.x.x.x-- > Gateway (because it is in bridging mode and does not have NAT functionality, a bridge interface and gateway are required)
6 int bv 100-- > because it is vlan100, the bridge interface must be 100, otherwise it will not be in a network segment
Ip address-- > ip address, that is, it can be used as a management address
7 ena service web-- > enable web Management
8 ip route 0.0.0.0 0.0.0.0 10.8.39.254-> provide routes to management addr
9 wlansec 100-- > wlan 100 security configuration
Security rsn enable-> enable wireless encryption
Security rsn ciphers aes enable-> enable AES encryption wirelessly
Security rsn akm psk enable-> Wireless enable shared key authentication
Security rsn akm psk set-key ascii 301301301-> Wireless password 301301301 (not less than 8 digits)
10 aaa new-m-> enable aaa
Aaa authentication login tacacs group tacacs+ local-> Log in to authenticate, establish a policy named tacacs, and tacacs+, first. If tacacs+ authentication fails, local users will be used.
Aaa authenticationenable default group tacacs+ local
Tacacs-server host10.8.39.2 key ruijie-> tacacs server address and key
Username ruijiepassword ruijie-> Local user ruijie password ruijie
Username ruijie privilege 15-> this account level is level 15
Line vty 0 4-> vty
Loginauthentication tacacs-> Associated tacacs
