Cisco 1841 PPPOE configuration
Rarely have time to go to the computer room to register idle equipment, found a 1841 router, power on a try, found that it can still be used normally. Configure the router with PPPOE dialing for the use of the wifi network segment, and the router configuration is posted below.
NET-1841-WIFI-GW#show run
Building configuration...
Current configuration: 1337 bytes
!
Version 15.0
Service timestamps debug datetime msec
Service timestamps log datetime msec
No service password-encryption
!
Hostname NET-1841-WIFI-GW
!
Boot-start-marker
Boot-end-marker
!
Enable password Cisco
!
No aaa new-model
Dot11 syslog
Ip source-route
!
!
!
!
Ip cef
No ipv6 cef
Multilink bundle-name authenticated
!
Vpdn enable
!
!
!
!
!
License udi pid CISCO1841C/K9 sn XXXXXXX
Username XXXXXXX password 0 XXXXXXX
!
!
!
!
!
!
Interface FastEthernet0/0
Description ConToCNC
No ip address
Duplex auto
Speed auto
Pppoe enable group global
Pppoe-client dial-pool-number 1
!
Interface FastEthernet0/1
Ip address 172.16.110.4 255.255.255.0
Ip nat inside
Ip virtual-reassembly
Duplex auto
Speed auto
!
Interface Dialer1
Description DiaToCNC
Mtu 1492
Ip address negotiated
Ip nat outside
Ip virtual-reassembly
Encapsulation ppp
Ip tcp adjust-mss 1450
Dialer pool 1
Dialer-group 1
Ppp chap hostname XXXXXXX
Ppp chap password 0 XXXXXXX
Ppp ipcp dns request
!
Ip forward-protocol nd
No ip http server
No ip http secure-server
!
!
Ip nat inside source list 1 interface Dialer1 overload
Ip route 0.0.0.0 0.0.0.0 Dialer1
!
Access-list 1 permit 172.16.110.0 0.0.0.255
Dialer-list 1 protocol ip permit
!
!
!
Control-plane
!
!
Line con 0
Line aux 0
Line vty 0 4
Login local
!
Scheduler allocate 20000 1000
End
