The method of realizing cad Circle Tangent

Editor to share with you the way to achieve cad tangent, I hope you have something to gain after reading this article, let's discuss it together!

The way to achieve the tangent of a cad circle is to draw a circle and click on the drawing line tool on the toolbar; then bring up the active menu and select the tangent point; then drag the mouse to find another endpoint; finally you can draw a tangent.

The method to realize the tangent of cad circle:

1. Open cad and click the circle drawing tool on the left toolbar, as shown in the following figure.

2. Draw a circle in the work area, as shown below.

3. Click the line drawing tool on the left toolbar, as shown in the following figure.

4. Hold down the ctrl key and click the right mouse button at the same time to bring up the activity menu and select the tangent point, as shown in the following figure.

5, move the mouse over the circle, there will be a small green circle, this is our tangent point, as shown in the following figure.

6. Click the left mouse button on the circle to determine one end of the tangent, and then drag the mouse to find another end point, as shown in the following figure.

7. After pulling to the specified position, click the left mouse button to determine the other end of the tangent, and you can draw a tangent completely, as shown in the following picture.

After reading this article, I believe you have a certain understanding of "the method of realizing cad tangent". If you want to know more about it, you are welcome to follow the industry information channel. Thank you for reading!