What is the test method of MT6620-wifi under the 4412 development board QtE system
This article mainly explains "what is the test method of MT6620-wifi under the 4412 development board QtE system", interested friends may wish to have a look. The method introduced in this paper is simple, fast and practical. Next, let the editor take you to learn "what is the test method of MT6620-wifi under the 4412 development board QtE system"?
After the iTOP4412-based system is burned and started, use the following command.
Wpa_passphrase XXX "YYY" > > / etc/wpa_supplicant.conf
Where XXX represents your WiFi network name, and YYY represents WPA-PSK or WPA2-PSK encrypted secret
Size. Then run the script
/ etc/init.d/mt6620
If the router is connected to the extranet, the development board can now ping the extranet.
The operation is shown in the following figure.
After the above command has been run, use the "ifconfig" command to view it, as shown in the following figure.
As can be seen from the figure above, the wifi has been successfully connected.
At this point, I believe that everyone on the "4412 development board QtE system under the MT6620-wifi test method is what" have a deeper understanding, might as well to the actual operation of it! Here is the website, more related content can enter the relevant channels to inquire, follow us, continue to learn!
