Common commands of Huawei switch
Show all configuration commands: display current-configuration
Batch create vlan commands:
Execute the command vlan batch under the system view to create VLAN in batch.
Create 10 consecutive VLAN:VLAN11 to VLAN20 in batch.
System-view [HUAWEI] vlan batch 11 to 20
Batch creation of 10 discontiguous VLAN:VLAN10, VLAN15 to VLAN19, VLAN25, VLAN28 to VLAN30.
System-view [HUAWEI] vlan batch 10 15 to 19 25 28 to 30
Description:
When creating discontiguous VLAN in batches, you can enter up to 10 discontiguous VLAN or VLAN segments at a time, and more than 10 can be configured using this command multiple times. For example, vlan batch 10 15 to 19 25 28 to 30 is a total of 4 discontiguous VLAN segments.
Change trunk to access
Int gi0/0/1
Undo port trunk allow-pass vlan 2-4094
Undo port link-type trunk
Vlan 20
Port gi0/0/1
Change access to trunk
Int gi0/0/1
Undo port default vlan
Undo port link-type
Port link-type trunk
Trunk allow-pass vlan 2-4094
Add the port to the appropriate VLAN
Password: admin123
"hexin-1": sys
Enter privileged mode: vlan 100
Port Gig 1-0-4 (PORT 4 joined VLAN100
QUIT launches to user mode
SAVE
Y
Add vlan command and two core hot standby configuration virtual ip commands to the core switch
Password: admin123
"hexin-1": sys
Enter privileged mode: vlan 200
Int vlan 200
Ip add 10.200.0.2 255.255.0.0 configuration: vlan200 management ip address can also be used as PC gateway address
Vrrp vrid 200 virtual-ip 10.200.0.1 configure virtual ip management address
Vrrp vrid 200 priority 120
Vrrp vrid 200 preempt-mode timer delay 20
Vrrp vrid 200 track interface gigabitethernet 1-0-21 reduced 100 configuration switch port 21-convinced AF-1020 firewall ETH2 interface
Vrrp vrid 200 track interface gigabitethernet 1-0-0 reduced 100 configure switch port 0-aggregation switch uplink port
At the same time, core switch 2 "hexin-2" should also be configured with the following command:
Vlan 200
Int vlan 200
Ip add 10.200.0.3 255.255.0.0
Vrrp vrid 200 irtual-ip 10.200.0.1
Port joins vlan
Int vlan 80
Port gi1/0/2
Batch add port command
Vlan 100
Port g0/0/1 to 0/0/20
Add trunk in batch
Inte range g 1-0-12 to gi 1-0-19
Cancel the command
Undo + command
Restart command
Reboot
Empty configuration command
Reset saved-configuration
Enter Y enter
The switch needs to be rebooted after initialization to take effect.
Enter reboot
