Jmeter for performance testing
Jmeter Basic Usage
Jmeter General Testing Lightweight Interface Testing: The simple steps are as follows:
1. Download jmeter, the jmeter package under linux and window generic
http://jmeter.apache.org/download_jmeter.cgi
This file can be used without installation and direct decompression
2. Enter the jmeter placement location:
I put it on disk D:
D:\javatools\apache-jmeter-2.9\bin Enter the directory windows click bat file
3. Click Start Project
cmd.exe below will pop up, do not close
Start up the interface:
4. Create a new project:
The steps for establishing a test project are as follows:
For example, interface: mo.ali.net:8080/gens? ee=90
Path: /gens
Server name: domain name mo.ali.net/Ip:10.11.21.11
Port number: port number of the link
Parameters are: parameters required by the interface, for example, ee is the parameter above
The project was established:
5. Add timer: absolute concurrency for loadrunner 10
Add Result Tracking:
6. View results
Aggregate report: specific meaning baidu, actual scenario application
View the result tree:
Jmeter Distributed Deployment:
Multiple load machines are used.
jmeter distributed pressure measurement in use
Three loaders and one controller;
The distributed implementation is in bin/jmeter.propertites of the controller
remotehosts=101.111.23.12,101.12.12.234
Click Run, remote start, your configuration 101.111.23.12 appears on the right
101.12.12.234 multiple loaders
Click on each one to execute separately, if all start click remote all start
2. Load Machine Deployment Start
Each load machine is installed on the same jmeter of the control machine, and the jmx scripts deployed on each machine are consistent; start each load machine: enter bin/jmeter. sh or jmeter.bat