Shulou(Shulou.com)05/31 Report--

In this article, the editor introduces in detail "how to solve the problem of slow network speed after win10 update". The content is detailed, the steps are clear, and the details are handled properly. I hope that this article "how to solve the problem of slow network speed after win10 update" can help you solve your doubts.

The solution to slow down the network speed after the win10 system update:

(special reminder. Valid only for Win10 Annual Update (Version 1607) and later, otherwise the input will report an error.)

1. Open the command prompt in administrator mode (right-click the start button and select), as shown in the figure.

2. Type. Netsh interface tcp show global and enter to see if the auto-adjustment level of the receive window is Normal (normal), as shown in the figure.

3. If so, type again. Netsh int tcp set global autotuninglevel=disabled and enter, and change it to Disabled; as shown in the figure.

4. If the automatic adjustment level of the receive window in step 2 is Disabled, there is no need to adjust it.

5. If you want to change back to Normal, type. The netsh int tcp set global autotuninglevel=normal; is shown in the figure.

6. If you feel that the speed does not improve significantly after changing to Disabled, you can change it back or turn it off, as long as it does not slow down significantly.

After reading this, the article "how to solve the problem of slow network speed after win10 update" has been introduced. If you want to master the knowledge points of this article, you still need to practice and use it yourself to understand it. If you want to know more about related articles, welcome to follow the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.